How to change the TDP? (PL1,PL2)

Step 1: Press the power button and continuously press F7 to enter the boot menu, then select “Enter Setup” to access the BIOS.
(Or press the Delete key repeatedly immediately after pressing the power button to enter the BIOS settings)

Step 2:The setup method varies slightly depending on the platform. Please follow the instructions according to your platform:

(1) Jasper Lake platform (N5105, N5095, N5100, N4500, e.g., Quieter3, PCG02 Pro, Overclock3, etc.)

Alder Lake-N platform (N95, N100, N97, N50, N200, e.g., Quieter4, PCG02 Pro, Overclock4, etc.)

Twin Lake platform(N150,e.g.,Quieter 4,Overclock 4, etc.): 

Go to Advanced→Power & Performance→CPU-Power Management Control→View/Configure Turbo Options →Power Limit 1 Override->Select Enabled.

Change the power limit values. Set Power Limit 1 to 6–8W (enter 8000 for 8W) and Power Limit 2 to 10–15W (enter 10000 for 10W)(for example, on the Quieter 4C).

(1) Gemini Lake platform (J4125, J4105, N4020, N4000, e.g., Quieter2, PCG02, etc.):

Go to Advanced→Thermal→DPTF→ Disable→ CPU Configuration→CPU Power Management→ Power Limit 1 Enable-> Enabled.

Select Power Limit 1 Power and Power Limit 2 Power, then adjust their values as needed.

Step 3: Press F4 to quickly save and exit.

(Or go to Save & Exit → Save Changes and Exit → Yes to save the changes and exit.)